Yazar "ÇETİN, Remzi" için Scopus İndeksli Yayınlar Koleksiyonu listeleme
-
Change in Porosity of A356 by Holding Time and Its Effect on Mechanical Properties
ULUDAĞ, Muhammet; ÇETİN, Remzi; GEMİ, Lokman; DIŞPINAR, Derya (Springer New York LLC, 2018)In most of the practical casting operations, it is important to be able to cast large number of part with one single melt. Therefore, when quantity of the charge and melting crucible is increased, during casting process, ... -
Characterization of the Effect of Melt Treatments on Melt Quality in Al-7wt %Si-Mg Alloys
ÇETİN, Remzi; ULUDAĞ, Muhammet; DIŞPINAR, Derya; TİRYAKİOĞLU, Murat (METALS, 2017-04-29)The effects of degassing, holding time and melt additions (Sr, Sr + Ti, Ti, B and B + Sr) on the quality of A356 melts were examined. A total of 120 reduced pressure test samples were collected. Pores in these samples were ... -
Effect of Degassing and Grain Refinement on Hot Tearing Tendency in Al8Si3Cu Alloy
ULUDAĞ, Muhammet; ÇETİN, Remzi; DIŞPINAR, Derya; TİRYAKİOĞLU, Murat (Springer International Publishing, 2018)The effect of melt quality on hot tearing susceptibility of Al8Si3Cu alloy was examined under six different conditions, by using a traditional T-shaped mold. Grain refinement was carried out by two different modifiers: ... -
Effect of Sr and Ti Addition on the Corrosion Behavior of Al-7Si-0.3Mg Alloy
ÇETİN, Remzi; ULUDAĞ, Muhammet; KOÇABAŞ, Mustafa; DIŞPINAR, Derya; CANSEVER, Nurhan (Archives of Foundry Engineering, 2017-02-23)In the present study, the corrosion behaviour of A356 (Al-7Si-0.3Mg) alloy in 3.5% NaCl solution has been evaluated using cyclic/potentiodynamic polarization tests. The alloy was provided in the unmodified form and it was ... -
Freezing Range, Melt Quality, and Hot Tearing in Al-Si Alloys
ULUDAĞ, Muhammet; ÇETİN, Remzi; DIŞPINAR, Derya (Springer Boston, 2018)In this study, three different aluminum-silicon alloys (A356, A413, and A380) that have different solidification morphology and solidification ranges were examined with an aim to evaluate the hot tearing susceptibility. ... -
Investigation of the efficiency of grain refiners on the hot tearing in Al8Si3Cu alloy
ULUDAĞ, Muhammet; ÇETİN, Remzi; DIŞPINAR, Derya (Stowarzyszenie Techniczne Odlewnikow Polskich/Polish Foundrymen's Association, 2018) -
Observation of Hot Tearing in Sr-B Modified A356 Alloy
ULUDAĞ, Muhammet; ÇETİN, Remzi; DIŞPINAR, Derya. (De Gruyter Open Ltd, 2017)In this work, T-shaped mould design was used to generate hot spot and the effect of Sr and B on the hot tearing susceptibility of A356 was investigated. The die temperature was kept at 250°C and the pouring was carried out ... -
The effects of degassing, grain refinement & Sr-addition on melt quality-hot tear sensitivity relationships in cast A380 aluminum alloy
ULUDAĞ, Muhammet; ÇETİN, Remzi; DIŞPINAR, Derya; TİRYAKİOĞLU, Murat (Elsevier Ltd, 2018)Hot tearing tendency of A380 with various element additions (Sr, Sr+Ti, Ti, B and B+Sr) was investigated. Constrained rod casting (CRC) hot tearing test method was used to characterize the hot tearing sensitivity. Reduced ...
DSpace@Karatay by Karatay University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..