Ara
Toplam kayıt 21, listelenen: 11-20
Aramanızla eşleşen bölüm veya koleksiyonlar
Aramanızla eşleşen öğeler
Alternative System Design for High Temperature Solid Particle Erosion Wear Problem
(Springer, 2021-01-30)
In order to simulate the wear behavior of materials subjected to solid particle erosion due to high temperature as well as
velocity effect in operating conditions such as power plants and jet engines, ASTM G76 standard ...
Methyl methacrylate in external fixation of supracondylar humerus fractures: An experimental study
(Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2018-08-24)
Supracondylar humerus fractures are common fractures around the elbow. Open fractures, comminuted metaphyseal fractures and also fractures with bone loss may need to be treated with external fixators. The aim of this study ...
Study Gas Flow Heating In Micro-Nozzle Through Walls Instead Of Preheating
(2016-07)
Previously, Preheating has been established in micro-nozzles to increase the specific impulse of thrusters and increase thrust level. However, heating may cause higher viscous losses in micro-nozzles working at low Reynolds ...
Prediction and sensitivity analysis under different performance indices of R1234ze ORC with Taguchi’s multi-objective optimization
(Case Studies in Thermal Engineering, 2020)
In this study, parametric optimization and sensitivity analysis of performance parameters were performed for the Organic Rankine Cycle (ORC) system at 120 °C heat source temperature. R1234ze, which is called the new-generation ...
Jeotermal ısı kaynaklı Organik Rankine Çevriminde kuru ve izantropik akışkanların çevresel etkilerinin ve termodinamik performanslarının karşılaştırılması
(GUFBD / GUJS Gümüşhane Üniversitesi FBD, 2022)
Organik Rankine Çevrimi (ORÇ), düşük sıcaklık aralığında su yerine organik akışkanın kullanıldığı bir elektrik üretim
sistemidir. ORÇ, elektrik üretmek için atık ısıyı değerlendirmek amacıyla santrallerde kullanılmaktadır. ...
Effect of Cooling Intensity and Position on Solidification in Semi-Continuous Casting of Copper
(Open Journal of Fluid Dynamics, 2016-09-13)
Cooling heat flux effect in both primary and secondary cooling zone has been studied
in semi-continuous casting of copper billet. Sufficient cooling is essential to reduce
casting defects and to get high productivity, ...
The effect of nanoclay particles on the incubation period in solid particle erosion of glass fibre/epoxy nanocomposites
(Wear, 2020-03-15)
During erosion tests of glass fibre/epoxy nanocomposites, an incubation period emerged because of the embedding of abrasive particles into the target material. In this study, the effect of this period on solid particle ...
Erosion Resistance of CFRP Composite Materials with Different Fiber Weaves Exposed to Cryogenic Treatment
(Taylor Francis, 2020-10-14)
Carbon fiber–reinforced polymers (CFRPs) are often exposed to solid particle erosion wear due to small particles moving freely in the atmosphere or in the environment and their impact on aircraft bodies. In this study, ...