Başlık için Mühendislik ve Doğa Bilimleri Fakültesi listeleme
Toplam kayıt 417, listelenen: 303-322
-
Obtaining the Manning roughness with terrestrialremote sensing technique and flood modeling using FLO-2D: A case study Samsun from Turkey
(Geofizika, 2020-09-09)Flooding is one of the most catastrophic events among the wide spectrum of natural disasters that impact human communities. The identification of floodprone areas and the probability of occurrence, or estimated return ... -
On Classification of Semigroup N by Green’s Theorem
(2022)In previous papers, it has been recently defined a new class of semigroups based on both Rees matrix and completely 0-simple semigroups. For this new structure, it has been introduced with certain basic properties and ... -
On-Line Collision Avoidance of Two Comman-Based Industrial Robotics Arms Using Advanced Collision Map
(Journal of Robotics and Mechatronics, 2014-06-20)This paper presents the development of a new stepclimbing mechanism for heavy load carriers. According to the method of measurement used, the results of experiments are given as the values of resistance and required driving ... -
One-dimensional pion, kaon, and proton femtoscopy in Pb-Pb collisions at √sNN = 2.76 TeV
(2015)The size of the particle emission region in high-energy collisions can be deduced using the femtoscopic correlations of particle pairs at low relative momentum. Such correlations arise due to quantum statistics and Coulomb ... -
Optimal Tuning of the SMC Parameters for a Two Two-Link Manipulator Co-Simulation Control
(ELEKTRONIKA IR ELEKTROTECHNIKA, 2021-10-27)—This paper presents the trajectory tracking control of a two-link planar robot manipulator using MSC Adams and MATLAB co-simulation which enables the innovative virtual prototyping of the systems without any mathematical ... -
Optimization of Inclined Base Cantilever Retaining Walls with The Harmony Search Algorithm
(Proceedings of the International Civil Engineering & Architecture Conference, 2019-04-17)Cantilever retaining walls have been commonly utilized to ensure stability of two different soil levels in geotechnical engineering. In design of cantilever retaining wall, there have been many soil parameters and wall ... -
Optimization of secondary cooling percentage during semi-continuous copper casting process
(Begell House, Inc., 2017-02-16)Sufficient cooling is essential to reduce casting defects and to get high productivity in semi-continuous casting of copper billet. On the other hand, low rate solidification is desired in order to develop coarser grain ... -
ORÇ ile Düşük Sıcaklıklı Isı Kaynaklarından Elektrik Üretilmesinde Islak ve Yeni Nesil Akışkanların Çevresel ve Termodinamik Performanslarının Karşılaştırılması
(NEÜ FMBD, 2021)Organik Rankine Çevrimi (ORÇ), termal enerjiyi elektrik enerjisine dönüştüren, yüksek oranda erişilebilir, yaygın olarak kullanılan bir enerji üretim şeklidir. ORÇ’de, türbin jeneratörü termal enerjiyi önce mekanik ... -
p-p, p-lambda, and lambda-lambda correlations studied via femtoscopy in pp reactions at √s = 7 TeV
(2019)We report on the first femtoscopic measurement of baryon pairs, such as p-p, p-, and , measured by ALICE at the Large Hadron Collider (LHC) in proton-proton collisions at √s = 7 TeV. This study demonstrates the feasibility ... -
Parametric investigation for discrete optimal design of a cantilever retaining wall
(Challenge Journal of Structural Mechanics, 2019-09-06)In this paper, discrete design optimization of a cantilever retaining wall has been submitted associated with a detailed parametric study of the wall. In optimal design, the minimum wall weight is treated as the objective ... -
Particle identification in ALICE: a Bayesian approach
(2016)We present a Bayesian approach to particle identification (PID) within the ALICE experiment. The aim is to more effectively combine the particle identification capabilities of its various detectors. After a brief explanation ... -
Performance of the ALICE experiment at the CERN LHC
(2014)ALICE is the heavy-ion experiment at the CERN Large Hadron Collider. The experiment continuously took data during the first physics campaign of the machine from fall 2009 until early 2013, using proton and lead-ion beams. ... -
A photoelectrochemical device for water splitting using oligoaniline-crosslinked [Ru(bpy)2(bpyCONHArNH2)]+2 dye/IrO2 nanoparticle array on TiO2 photonic crystal modified electrode
(International Journal of Hydrogen Energy (Elsevier), 2017-09-07)This article describes the construction of photoelectrochemical cell system splitting water into hydrogen and oxygen using UV–vis light under constant applied voltage. Oligoaniline-crosslinked 2-(4-aminobenzyl)malonic acid ... -
Pion–kaon femtoscopy and the lifetime of the hadronic phase in Pb−Pb collisions at √ sNN = 2.76 TeV
(2020)In this paper, the first femtoscopic analysis of pion–kaon correlations at the LHC is reported. The analysis was performed on the Pb–Pb collision data at √sNN = 2.76 TeV recorded with the ALICE detector. The non-identical ... -
Precision measurement of the mass difference between light nuclei and anti-nuclei
(2015)The measurement of the mass differences for systems bound by the strong force has reached a very high precision with protons and anti-protons1,2. The extension of such measure- ment from (anti-)baryons to (anti-)nuclei ... -
Prediction and sensitivity analysis under different performance indices of R1234ze ORC with Taguchi’s multi-objective optimization
(Case Studies in Thermal Engineering, 2020)In this study, parametric optimization and sensitivity analysis of performance parameters were performed for the Organic Rankine Cycle (ORC) system at 120 °C heat source temperature. R1234ze, which is called the new-generation ... -
Prevention of torsional irregularity in steel structures via brace members
(2nd Advanced Engineering Days, 2022-03-16)Steel structures can be designed using moment-resisting frame systems or braced framesystems. Torsional irregularities can occur in non-symmetrical structures designed withmoment-resisting steel frame systems. These torsional ... -
Probing the Effects of Strong Electromagnetic Fields with Charge-Dependent Directed Flow in Pb-Pb Collisions at the LHC
(2020)The first measurement at the LHC of charge-dependent directed flow (v1) relative to the spectator plane is presented for Pb-Pb collisions at ffiffiffiffiffiffiffi sNN p ¼ 5.02 TeV. Results are reported for charged hadrons ... -
Production of (anti-)3He and (anti-)3H in p-Pb collisions at sNN = 5.02 TeV
(2020)The transverse momentum (pT) differential yields of (anti-)3He and (anti-)3H measured in p-Pb collisions at √sNN = 5.02 TeV with ALICE at the Large Hadron Collider (LHC) are presented. The ratios of the pT- integrated ... -
Production of 4He and 4He in Pb–Pb collisions at √sNN = 2.76 TeV at the LHC
(2017)Results on the production of 4He and 4He nuclei in Pb–Pb collisions at √sNN = 2.76 TeV in the rapidity range | y |< 1, using the ALICE detector, are presented in this paper. The rapidity densities corresponding to 0–10% ...
DSpace@Karatay by Karatay University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
