Başlık için Mühendislik ve Doğa Bilimleri Fakültesi listeleme
Toplam kayıt 417, listelenen: 83-102
-
Determining of Critical Safety Factors for Homogeneous Slopes with Mathematical Model
(4th International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, 2016-06-02)In this study, the effect of slope and soil parameters on the slope stability has been investigated. The slope heights, the angle of slope, the weight per unit of volume, the angle of internal friction and the cohesion ... -
Determining Of Safety Factors For Cantilever Retaining Wall With Mathematical Model
(International Conference on Mathematical Studies and Applications 2018, 2018-12-28)In the conventional design of cantilever retaining wall, trial-and-error method has been used to determine wall dimensions which satisfies the stability conditions of wall. This method takes time in design period and is ... -
Determining Optimal Routing Solution Of A Patrol Car
(3rd International Conference on Computational Mathematics and Engineering Science (CMES 2018), 2018-05-07)Chinese Postman Problem which is dealt with in the context of the arc routing problem is one of the routing problem in 1962 in order to get the shortest turn by passing at least once on every arc on the chart. It can be ... -
Developing numerical equality to regional intensity–duration–frequency curves using evolutionary algorithms and multi‑gene genetic programming
(Acta Geophysica, 2022-08-24)This study aims to carry out regional intensity−duration−frequency (IDF) equality using the relationship with IDF obtained from point frequency analysis. Eleven empirical equations used in the literature for seven climate ... -
Diagnosis of Coronary Artery Disease Using Deep Belief Networks
(2016-05)In this study, a decision-support system is presented to aid cardiologists during the diagnosis and to create a base for a new diagnosis system which separates two classes (CAD and no-CAD patients) using an electrocardiogram ... -
Dielectron and heavy-quark production in inelastic and high-multiplicity proton–proton collisions at √s = 13 TeV
(2019)The measurement of dielectron production is presented as a function of invariant mass and transverse momentum (pT) at midrapidity (|ye|<0.8) in proton–proton (pp) collisions at a centre-of-mass energy √ s = 13 TeV. ... -
Dielectron production in proton-proton and proton-lead collisions at sNN = 5.02 TeV
(2020)We report on measurements of a charge-dependent flow using a novel three-particle correlator with ALICE in Pb-Pb collisions at the CERN Large Hadron Collider (LHC), and discuss the implications for observation of local parity ... -
Dielectron production in proton-proton collisions at s√ = 7 TeV
(2018)The first measurement of e+e− pair production at mid-rapidity (|ηe| < 0.8) in pp collisions at s√=7 TeV with ALICE at the LHC is presented. The dielectron production is studied as a function of the invariant mass (mee < ... -
Differential studies of inclusive J/ψ and ψ(2S) production at forward rapidity in Pb-Pb collisions at √sNN =2.76TeV
(2016)The production of J/ψ and ψ(2S) was studied with the ALICE detector in Pb-Pb collisions at the LHC. The measurement was performed at forward rapidity (2.5 < y < 4) down to zero transverse momentum (pt) in the dimuon decay ... -
Direct photon elliptic flow in Pb–Pb collisions at √sNN = 2.76 TeV
(2019)The elliptic flow of inclusive and direct photons was measured at mid-rapidity in two centrality classes 0–20% and 20–40% in Pb–Pb collisions at √sNN = 2.76 TeV by ALICE. Photons were detected with the highly segmented ... -
Direct photon production in Pb-Pb collisions at sNN−−−√ = 2.76 TeV
(2016)Direct photon production at mid-rapidity in Pb-Pb collisions at sNN−−−√=2.76 TeV was studied in the transverse momentum range 0.9<pT<14 GeV/c. Photons were detected with the highly segmented electromagnetic calorimeter ... -
Drought and Flood Analyses of Samsun City
(International Conference on Civil and Environmental Engineering, 2017-05-08)The aim of this study is to analyze the flood and drought based on precipitation and streamflow data gathered from Samsun City, the most developed province of the Black Sea Region. Flood and drought analysis are important ... -
Dışmerkez Diyagonal Çaprazların Sismik Yükler Altında Çelik Yapılara Etkisi
(1. ULUSAL MÜHENDİSLİK VE TEKNOLOJİ KONGRESİ, 2019-10-19)Günümüzde, çelik taşıyıcı sistemlerin kullanımı özellikle endüstri binalarında gün geçtikçe artmaktadır. Gerek Türkiye Bina Deprem Yönetmeliği (TBDY–2018) gerekse Çelik Yapıların Tasarım, Hesap ve Yapımına Dair Esaslar ... -
Dışmerkez V Çaprazların Çelik Bir Yapı Üzerinde İncelenmesi
(KMÜ Mühendislik ve Doğa Bilimleri Dergisi, 2019)Betonarme yapılarda deprem etkilerine karşı betonarme perdeler kullanılırken, çelik yapılarda ise çelik çaprazlar tercih edilmektedir. Çelik çaprazlar yatay yükler altında yapının daha fazla yük taşırken, daha az deplasman ... -
Effect of Cooling Intensity and Position on Solidification in Semi-Continuous Casting of Copper
(Open Journal of Fluid Dynamics, 2016-09-13)Cooling heat flux effect in both primary and secondary cooling zone has been studied in semi-continuous casting of copper billet. Sufficient cooling is essential to reduce casting defects and to get high productivity, ... -
Effect of La3+ and Ti4+ Ions on the Magnetic Properties of Barium Hexaferrite Powders Synthesized Using Sol-Gel Method
(Journal of Magnetics, 2016-10)Doped and undoped barium hexaferrite powders (BaFe12O19, Ba0.7Ti0.3Fe12O19 and Ba0.7La0.3Fe12O19) were produced by the sol-gel method. The effects of substituting elements were studied in terms of the magnetic properties ... -
The effect of nanoclay particles on the incubation period in solid particle erosion of glass fibre/epoxy nanocomposites
(Wear, 2020-03-15)During erosion tests of glass fibre/epoxy nanocomposites, an incubation period emerged because of the embedding of abrasive particles into the target material. In this study, the effect of this period on solid particle ... -
Effect of Sr and Ti Addition on the Corrosion Behavior of Al-7Si-0.3Mg Alloy
(Archives of Foundry Engineering, 2017-02-23)In the present study, the corrosion behaviour of A356 (Al-7Si-0.3Mg) alloy in 3.5% NaCl solution has been evaluated using cyclic/potentiodynamic polarization tests. The alloy was provided in the unmodified form and it was ... -
Effective 3D Surface Modeling for Geographic Information Systems
(Copernicus Gesellschaft Mbh, 2016)Abstract. In this work, we propose a dynamic, flexible and interactive urban digital terrain platform with spatial data and query processing capabilities of geographic information systems, multimedia database functionality ... -
Ege Bölgesi Yaz Ayları Buharlaşma Verilerine Trend Analizi
(5. Uluslararası Katılımlı Toprak ve Su Kaynakları Kongresi, 2017-09-12)Bu çalışmada Ege Bölgesi’nde bulunan Afyonkarahisar, Uşak, Denizli, Muğla, Aydın ve İzmir illerine ait meteoroloji gözlem istasyonlarının, 1971 – 2014 yılları arası kaydedilen Temmuz ve Ağustos aylarına ait buharlaşma ...
DSpace@Karatay by Karatay University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
